OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: olest on December 05, 2018, 12:23:37 pm

Title: OpenVPN tunnel network static range
Post by: olest on December 05, 2018, 12:23:37 pm

With OpenVPN access server there is both a tunnel network for dynamic clients and one for static clients.
How do I add a tunnel network for static clients to a OpenVPN server at OPNsense?

If I add a tunnel network outside server tunnel network with client specific overrides, the trafic is not routed correct.

Title: Re: OpenVPN tunnel network static range
Post by: bartjsmit on December 05, 2018, 03:15:10 pm

You can configure a second OpenVPN server for your static clients. It has to listen on a different public IP address and/or port on the OPNsense WAN interface.

Bart...

Title: Re: OpenVPN tunnel network static range
Post by: olest on December 06, 2018, 08:03:11 pm

I know that I can create a second server on a different port. but I wanted to use the same server and a range that do not potential conflict if an other client get the same IP.