OPNsense Forum
Archive => 18.7 Legacy Series => Topic started by: Julien on November 28, 2018, 11:17:51 pm
-
Dear all,
I have been struggling to route traffic and running between opnsense and pfsense.
Opnsense is running 17.7.8
Pfsense is running 2.4.4
both box are running openvpn version 2.4.6_3
the tunnel is up on both sides, the issue is we cannot connect from location A to B and otherway arround.
this issue is mostly if the tunnel or remote ip are differents but i've checked them like 100 time.
Can someone please advies me how to get ths routing correctly set up.
Thank you so much
-
Dear all,
I have been struggling to route traffic and running between opnsense and pfsense.
Opnsense is running 17.7.8
Pfsense is running 2.4.4
both box are running openvpn version 2.4.6_3
the tunnel is up on both sides, the issue is we cannot connect from location A to B and otherway arround.
this issue is mostly if the tunnel or remote ip are differents but i've checked them like 100 time.
Can someone please advies me how to get ths routing correctly set up.
Thank you so much
Firewall rule created on openvpn interface to allow traffic ?
-
Also posting site's A and B server and client settings would help. Specifically:
Tunnel Network
IPv4 Local Network
Im assuming you are only using IPv4
-
Thank you guys,
managed to get it fixed,
were building a tunnel with the same ip
were already using 10.13.0.0/24 in a different tunnel.