OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: misocoder on November 22, 2018, 02:16:56 pm

Title: OpenVOX IPC110C does not boot
Post by: misocoder on November 22, 2018, 02:16:56 pm

Hello,

I put the latest i386 nano image on a 4GB CF card using Win32DiskImager and tried to boot the IPC110C board but nothing happens. The serial console is blank as well (I think the settings are correct, 115200 etc.). All green LEDs are blinking constantly, that's all it does. Could the power supply be damaged? Anyone else have this problem before? Is there anything else you have to do to get a bare bones opnsense installation set up?

Thanks.

Title: Re: OpenVOX IPC110C does not boot
Post by: rackmatrix on December 08, 2018, 06:32:44 pm

Hello,

I have some questions for better understanding your problem.
Did you already used successfully IPC110C for OPNsense ?
What do you see on Serial interface during boot ?

Regards

Title: Re: OpenVOX IPC110C does not boot
Post by: rackmatrix on December 08, 2018, 07:31:44 pm

Hello misocoder,

I just downloaded the lastest i386 nano on 4GB CF card and it's working on an IPC110.
I also flash on CF card with HDD RAW copy http://hddguru.com/software/HDD-Raw-Copy-Tool/ (http://hddguru.com/software/HDD-Raw-Copy-Tool/).

It's working for me, hence it can work for you, just help you to find the right configuration for startup.

Regards