OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: ezraimanuel on November 07, 2018, 03:18:41 pm

Title: pf timeouts
Post by: ezraimanuel on November 07, 2018, 03:18:41 pm
Hello, how can i change default value for these? (tcp.opening, etc)

Code: [Select]
TIMEOUTS:
tcp.first                    30s
tcp.opening                   5s
tcp.established           18000s
tcp.closing                  60s
tcp.finwait                  30s
tcp.closed                   30s
tcp.tsdiff                   10s
udp.first                    60s
udp.single                   30s
udp.multiple                 60s
icmp.first                   20s
icmp.error                   10s
other.first                  60s
other.single                 30s
other.multiple               60s
frag                         30s
interval                     10s
src.track                     0s
in my old freebsd i always custom the timeouts for protection and other things.

this is my old parameters:
Code: [Select]
set timeout { interval 10, frag 10 }
set timeout { tcp.first 15, tcp.opening 10, tcp.established 3600, tcp.closing 10, tcp.finwait 15, tcp.closed 15 }
set timeout { udp.first 60, udp.single 15, udp.multiple 60 }
set timeout { icmp.first 20, icmp.error 10 }
set timeout { other.first 60, other.single 30, other.multiple 60 }

cheers