OPNsense Forum
Archive => 18.7 Legacy Series => Topic started by: va176thunderbolt on October 30, 2018, 05:41:05 am
-
I have a GPS attached serially and configured in NTP as a time source. Works great - sync's right up. However, when I go into Services/Network Time/Status, I get a php error:
[30-Oct-2018 09:38:37 Etc/GMT-5] PHP Warning: A non-numeric value encountered in /usr/local/www/status_ntpd.php on line 100
[30-Oct-2018 09:38:37 Etc/GMT-5] PHP Warning: A non-numeric value encountered in /usr/local/www/status_ntpd.php on line 102
[30-Oct-2018 09:38:37 Etc/GMT-5] PHP Warning: A non-numeric value encountered in /usr/local/www/status_ntpd.php on line 103
[30-Oct-2018 09:38:37 Etc/GMT-5] PHP Warning: A non-numeric value encountered in /usr/local/www/status_ntpd.php on line 105
The Dashboard Network Time widget also chokes.
I've submitted a couple of error reports, and I'd be happy to allow someone access if they needed to test/troubleshoot on my box.
Adam
-
Hi Adam,
Would you mind providing the output of:
# /usr/local/sbin/ntpq -c clockvar
Thanks,
Franco
-
adam@gw:~ % sudo /usr/local/sbin/ntpq -c clockvar
Password:
associd=0 status=00f2 15 events, clk_bad_format,
device="NMEA GPS Clock",
timecode="$GPRMC,112850,A,____.____,_,_____.____,_,000.0,190.7,301018,007.0,W*__",
poll=21419, noreply=8, badformat=261, baddata=0, fudgetime2=600.000,
stratum=0, refid=GPS, flags=13
adam@gw:~ %
-
Super, thanks! Will fix for 18.7.7.
https://github.com/opnsense/core/issues/2861
Cheers,
Franco
-
Is ____.____ the actual output or did you blank it? I'm asking because it can't parse latitude and longitude and I'm unsure how to parse correctly what is actually returned. I don't need the exact values, just the info whether each "_" is literally a number or not.
Cheers,
Franco
-
That is the actual output.
-
Ok, so there may also be an issue with the GPS tracker itself.
In any case, will fix the malformed parsing. Thanks!
-
Thanks Franco!
-
Hi Adam,
Here is the patch with additional corrections for other GPS devices and GUI sanity:
https://github.com/opnsense/core/commit/0b58f2f48
Can you confirm it works for you? Under the circumstances of the output it will show N/A for latitude and longitude since the GPS doesn't return any values.
# opnsense-patch 0b58f2f48
Cheers,
Franco
-
Curious if this was resolved and also what GPS device you used via serial.
-
While the patch should speak for itself on the resolved front I don't know what the device was. Maybe Adam can shed some light on it.
Cheers,
Franco