OPNsense Forum
English Forums => Development and Code Review => Topic started by: bob@afrinet.eu on October 23, 2018, 03:31:20 pm
-
We were testing the 19.1ß since It should now be able to boot on Denverton MB.
But we think that there is a problem with the EMMC support.
Do you know if the following modules are compiled with the actual ß kernel in 19.1 ?
- sdhci_pci/mmc
- sdhci_acpi/mmc
- mmc/mmcsd
Thanks for your reply.
-
Here is the output of the boot.
This platform is working with pfSense 2.4.4.
We have removed all extension cards (4G, WiFi) this has no effect on boot which keeps on hanging just after sdhci_pci0-slot0
989D9C92A0A2A0A2B4B4B4B4B499Version 2.19.1266. Copyright (C) 2018 American Megatrends, Inc. NCA-1510 BIOS V1.12(06/11/2018) Press <Tab> or <DEL> to enter setup.Ä /boot/config: -S115200 -D
/boot/config: -S115200 -D
Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS 614kB/1988232kB available memory
FreeBSD/x86 bootstrap loader, Revision 1.1
Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
Loading /boot/defaults/loader.conf
BIOS drive D: is disk1
BIOS 614kB/1988232kB available memory
FreeBSD/x86 bootstrap loader, Revision 1.1
Loading /boot/defaults/loader.conf 19.1 ``Insert Name Here''
1 .Boot Multi User [Enter]
2 .Boot [S]ingle User
3 .[Esc]ape to loader prompt
4 .RebootOptions:
5 .[K]ernel: kernel (1 of 2)
6 .Configure Boot [O]ptions...Autoboot in 2 seconds. [Space] to pauseAutoboot in 1 seconds. [Space] to pause /boot/kernel/kernel text=0x162e228
syms=[0x8+0x1776d8\+0x8+0x1901fa\/boot/entropy size=0x1000
/boot/kernel/if_gre.ko size 0x6e18 at 0x2379000
boot/kernel/if_tap.ko size 0x7570 at 0x2380000
boot/kernel/pf.ko /-\size 0x54e78 at 0x2388000
/boot/kernel/carp.ko /size 0xe4a8 at 0x23dd000
/boot/kernel/if_bridge.ko \size 0xe3e0 at 0x23ec000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x6fd0 at 0x23fb000
/boot/kernel/if_lagg.ko |size 0x126a8 at 0x2402000
/boot/kernel/ng_UI.ko size 0x1610 at 0x2415000
loading required module 'netgraph'
/boot/kernel/netgraph.ko \size 0x173e0 at 0x2417000
/boot/kernel/ng_async.ko size 0x3620 at 0x242f000
/boot/kernel/ng_bpf.ko size 0x4fb8 at 0x2433000
/boot/kernel/ng_bridge.ko size 0x4e98 at 0x2438000
/boot/kernel/ng_cisco.ko size 0x31e0 at 0x243d000
/boot/kernel/ng_echo.ko size 0xf20 at 0x2441000
/boot/kernel/ng_eiface.ko size 0x38b8 at 0x2442000
/boot/kernel/ng_ether.ko size 0x4870 at 0x2446000
/boot/kernel/ng_frame_relay.ko size 0x1db0 at 0x244b000
/boot/kernel/ng_hole.ko size 0x17e8 at 0x244d000
/boot/kernel/ng_iface.ko size 0x4250 at 0x244f000
/boot/kernel/ng_ksocket.ko size 0x6250 at 0x2454000
/boot/kernel/ng_l2tp.ko size 0x7d88 at 0x245b000
/boot/kernel/ng_lmi.ko size 0x3fe0 at 0x2463000
/boot/kernel/ng_mppc.ko size 0x65c8 at 0x2467000
loading required module 'rc4'
/boot/kernel/rc4.ko size 0xb48 at 0x246e000
/boot/kernel/ng_one2many.ko size 0x2ad8 at 0x246f000
/boot/kernel/ng_ppp.ko /size 0xa3e0 at 0x2472000
/boot/kernel/ng_pppoe.ko \size 0x8f08 at 0x247d000
/boot/kernel/ng_pptpgre.ko size 0x5f68 at 0x2486000
/boot/kernel/ng_rfc1490.ko size 0x2570 at 0x248c000
/boot/kernel/ng_socket.ko size 0x6288 at 0x248f000
/boot/kernel/ng_tee.ko size 0x21a0 at 0x2496000
/boot/kernel/ng_tty.ko size 0x2ec0 at 0x2499000
/boot/kernel/ng_vjc.ko size 0x45b8 at 0x249c000
/boot/kernel/ng_vlan.ko size 0x2f20 at 0x24a1000
/boot/kernel/if_enc.ko size 0x31f0 at 0x24a4000
/boot/kernel/pflog.ko size 0x28b0 at 0x24a8000
/boot/kernel/pfsync.ko |size 0xd578 at 0x24ab000
/boot/kernel/ng_car.ko size 0x3370 at 0x24b9000
/boot/kernel/ng_deflate.ko size 0x36a8 at 0x24bd000
/boot/kernel/ng_pipe.ko size 0x4ef8 at 0x24c1000
/boot/kernel/ng_pred1.ko size 0x3658 at 0x24c6000
/boot/kernel/ng_tcpmss.ko size 0x2058 at 0x24ca000
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p14 93e30e927e5(stable/18.7) amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD HARDENING] procfs hardening: enabled
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-in
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x1<RDCL_NO>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8186896384 (7807 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL TIANO >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1100035537 Hz quality 1000
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff810b3240, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <processor> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> mem 0xdff60000-0xdff7ffff irq 20 at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> mem 0xdff40000-0xdff5ffff irq 21 at device 15.0 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xdfd00000-0xdfd7ffff,0xdfd80000-0xdfd83fff irq 21 at device 0.0 on pci3
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:90:0b:7c:3a:49
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> mem 0xdff20000-0xdff3ffff irq 22 at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xdfc00000-0xdfc7ffff,0xdfc80000-0xdfc83fff irq 22 at device 0.0 on pci4
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:90:0b:7c:3a:4a
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> mem 0xdff00000-0xdff1ffff irq 23 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros 9280> mem 0xdfb00000-0xdfb0ffff irq 23 at device 0.0 on pci5
[ath] enabling AN_TOP2_FIXUP
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ahci0: <AHCI SATA controller> port 0xe0c0-0xe0c7,0xe0b0-0xe0b3,0xe040-0xe05f mem 0xdff96000-0xdff97fff,0xdffa2000-0xdffa20ff,0xdffa1000-0xdffa17ff irq 20 at device 19.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ahci1: <AHCI SATA controller> port 0xe0a0-0xe0a7,0xe090-0xe093,0xe020-0xe03f mem 0xdff94000-0xdff95fff,0xdffa0000-0xdffa00ff,0xdff9f000-0xdff9f7ff irq 21 at device 20.0 on pci0
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahcich8: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdff80000-0xdff8ffff irq 19 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 22.0 on pci0
pci6: <ACPI PCI bus> on pcib6
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdf600000-0xdf7fffff,0xdf804000-0xdf807fff irq 16 at device 0.0 on pci6
ix0: Using MSI-X interrupts with 5 vectors
ix0: Ethernet address: 00:90:0b:7c:3a:4b
ix0: netmap queues/slots: TX 4/2048, RX 4/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdf400000-0xdf5fffff,0xdf800000-0xdf803fff irq 17 at device 0.1 on pci6
ix1: Using MSI-X interrupts with 5 vectors
ix1: Ethernet address: 00:90:0b:7c:3a:4c
ix1: netmap queues/slots: TX 4/2048, RX 4/2048
pcib7: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci7: <ACPI PCI bus> on pcib7
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdf000000-0xdf1fffff,0xdf204000-0xdf207fff irq 16 at device 0.0 on pci7
ix2: Using MSI-X interrupts with 5 vectors
ix2: Ethernet address: 00:90:0b:7c:3a:4d
ix2: netmap queues/slots: TX 4/2048, RX 4/2048
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xdee00000-0xdeffffff,0xdf200000-0xdf203fff irq 17 at device 0.1 on pci7
ix3: Using MSI-X interrupts with 5 vectors
ix3: Ethernet address: 00:90:0b:7c:3a:4e
ix3: netmap queues/slots: TX 4/2048, RX 4/2048
pci0: <simple comms> at device 24.0 (no driver attached)
pci0: <simple comms, UART> at device 26.0 (no driver attached)
pci0: <simple comms, UART> at device 26.1 (no driver attached)
pci0: <simple comms, UART> at device 26.2 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0xdff9a000-0xdff9afff,0xdff99000-0xdff99fff irq 16 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 7 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 10 on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c200001600
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c200001600
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c200001600
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c200001600
device_attach: est3 attach returned 6
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus3 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich8 bus 0 scbus2 target 0 lun 0
ada0: <2.5" SATA SSD 3ME2 M151229> ACS-2 ATA SATA 3.x device
ada0: Serial Number 20170919AA4851518014
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Sierra Wireless, Incorporated Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A> at usbus0
u3g0 on uhub0
u3g0: <Sierra Wireless, Incorporated Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A, class 0/0, rev 3.00/0.06, addr 1> on usbus0
u3g0: Found 5 ports.
sdhci_pci0-slot0: Controller timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x00001002
sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000001
sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080
sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07
sdhci_pci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000001
sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2: 0x00000000
sdhci_pci0-slot0: Caps: 0x546ec8b2 | Caps2: 0x80000007
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr: 0x00000000 | Slot int: 0x00000001
sdhci_pci0-slot0: ===========================================
sdhci_pci0-slot0: Controller timeout
[…]
-
19.1 will be 11.2 so that should be fine.
Can't give out test images at this point. We're still working on finalising the 19.1-BETA internally.
Cheers,
Franco
-
Looks like you have some libraries in FreeBSD-src/sys/dev/sdhci/*
which are partly from 11.1 and partly from 11.2
Like sdhci_fdt.c
Maybe merging with what's in there might help : https://github.com/freebsd/freebsd/tree/releng/11.2/sys/dev/sdhci/*
-
src.git master is on 11.2. Check your sources. :)