OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: Serius on October 20, 2018, 04:19:38 pm

Title: Stopped working
Post by: Serius on October 20, 2018, 04:19:38 pm

Today I left for a couple of hours and when a came back there was no network. I connected a screen to the router and it was showing something like the attached image. It was slightly different as the only thing shown was detecting the hard disk, then the memory cards reader, and nothing more.
I rebooted and changed the data cable port and the image is what I get now.

Is this normal?
Is also normal not counting at least with the ip leases for accessing the switch?

Enviado desde mi MI 5s Plus mediante Tapatalk
(https://uploads.tapatalk-cdn.com/20181020/a9d895f57f4139aeabeacd64437033c9.jpg)

Title: Re: Stopped working
Post by: bringha on October 20, 2018, 08:04:27 pm

... And you root filesystem is on da0 or da1?

This reads to me that after a reboot (?) it cannot find its root filesystem anymore ..... and now asking in taptalk to give the information where the root filesystem is ...

Br br

Title: Re: Stopped working
Post by: franco on October 21, 2018, 08:29:34 pm

Is this a system on an USB stick? If yes:

a) USB stick is dead
b) install os-boot-delay plugin


Cheers,
Franco

Title: Re: Stopped working
Post by: Serius on October 21, 2018, 08:36:45 pm

Thanks for your help. I could not repair this system by myself so I decided to put online the opns VM I was working on.

The baremetal was using a fresh laptop platter as the system drive. I don't know what happened, but this system saw its last configuration change two weeks ago, and been left in its own since then.
I'm concerned about this low life expectancy.

@bringha I used what I had in hand that still had internet after all the network went down.

Enviado desde mi MI 5s Plus mediante Tapatalk