Print Page - State table problem afer reboot

Title: State table problem afer reboot
Post by: Maarten on July 26, 2018, 02:27:57 PM

Hi,

I have 2 routers connected over openvpn. I use policy routing to route the subnets. If I run a ping from one host to a host on the other network and then reboot the router, at boot the router creates a wrong state.

This happens probably because the host is still pinging and the vpn is not yet online. It is not always the case, but, when I have 3 pings to separate hosts, usually 1 or 2 do not reply untill I do a State table reset.

Is this a known issue?

Best regards,

Maarten

OPNsense 18.1.13-amd64
FreeBSD 11.1-RELEASE-p11
OpenSSL 1.0.2o 27 Mar 2018

Title: Re: State table problem afer reboot
Post by: Maarten on August 13, 2018, 08:20:02 AM

I've created a bug report: https://github.com/opnsense/core/issues/2631

OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: Maarten on July 26, 2018, 02:27:57 PM