Hey folks,
Considering trying out opnsense and was wondering if it offered time of use restrictions? By that, I don't just mean a one-size-fits-all setting, but, where I can select individual MAC addresses (the kids' tablets) and only allow them access at certain times of the day.
Possible?
You can create schedules under Firewall -> Settings -> Schedules and set your needed time.
Then create a Firewall Rule and select the created Schedules.
Best is maybe to set the time the internet should be blocked and create a deny rule on top.
You can register the MAC in the DHCP Server and assing a static IP. So you can create the rule only for the single device via the IP-Adress.
Thanks for the tip. However, I was not able to get the software to work at all, incl the dhcp server.. went back to smoothwall.
Quote from: BeNe on April 13, 2018, 09:58:21 AM
You can create schedules under Firewall -> Settings -> Schedules and set your needed time.
Then create a Firewall Rule and select the created Schedules.
Best is maybe to set the time the internet should be blocked and create a deny rule on top.
You can register the MAC in the DHCP Server and assing a static IP. So you can create the rule only for the single device via the IP-Adress.
it is working like a charm but try to set up: "every day, between 20:00 and 08:00 next day" - that is kind of impossible:
1- every day has to be marked separately
2- hours have to be split into:
20:00-23:59
00:00-08:00
very very inconvenient
but it works
...have an eye on the existing states after your rule ("block" rule, I suggest) kicks in. Othwise the rule might not work as expected and will not end all (established...) "interwebs activities" after 20:00....
You could also try to schedule "allow" rules between 08:00 and 20:00.
Hey, cool! Thanks for the quick response! 🙌