OPNsense Forum

English Forums => General Discussion => Topic started by: bhawk on February 02, 2018, 07:05:07 AM

Title: MAx supported NICs
Post by: bhawk on February 02, 2018, 07:05:07 AM
Hello
I am running v 17.1. My hardware has 8 igb ports which run fine. Somewhere i found 8x Gigabit PCIe NIC card. Now my system should typically show 16 NICs but it only shows 12. ANy ideas what might be causing this?
Title: Re: MAx supported NICs
Post by: bartjsmit on February 02, 2018, 08:28:45 AM
Just a thought - you can have around 4000 VLAN's ;-)

Bart...
Title: Re: MAx supported NICs
Post by: franco on February 02, 2018, 08:36:29 AM
At some point there is a slowdown in operation with too many interfaces plugged in but deployments with a few hundreds of interfaces (mostly VLANs) is not uncommon and running fine.

What are your interface names? Can you share your dmesg output?


Cheers,
Franco
Title: Re: MAx supported NICs
Post by: bhawk on February 02, 2018, 11:42:23 AM
igb0 to igb10 with one named em0
will share dmesg soon :)