I am posting here the same I have posted on Pfsense forum. I am using both but i have configure Pfsense only with ikev2 ipsec vpn. Is Opnsense any better at this?
Can I add a second Local subnet to my Ipsec configuration?
How do I forward vpn traffic to Internet?
At the moment I have only access to the configured Local subnet in Phase 2.
I cannot use the remote vpn gateway on my Windows laptop, because it won't connect to the internet, nor can I reach a remote subnet reachable from the Local subnet non-vpn clients.
With microsoft pptp VPN the client is put directly in the local subnet, and can use the remote gateway, and can access other subnets.
I have followed this article
https://doc.pfsense.org/index.php/IKEv2_with_EAP-MSCHAPv2
There is no gateway, the first client gets the .1 address. I have tried to add firewall rules to allow the traffic, but it does not seem to help.
Again, is vpn traffic routable?
Thanks
I can only assure you about OpenVPN and PPTP (I didn't use IPsec), you can have internet traffic through the tunnel with both OpenVPN (site-to-site & client VPN) and with clients connected through PPTP.
There are options to force the traffic through VPN, also settings for GW and DNS to be sent to connected clients.
I hope it helps! :)