Has anyone had an issue with Deciso's hardware? I just received a new DEC697 unit. First time I attempted to connect I was unable to get to the web admin interface, after doing the usual reboot/retry routine, the inteface became available. At that point I only browsed the interface, then set the unit aside for when I had more time at hand to set things up...
Now, that I have some time... no matter what I've tried, I cannot get to the web interface.
Connecting via the serial port shows an issue. When attempting:
screen /dev/tty.usbmodem98265371 115200
I end up with this message:
nvme0: READ sqid:4 cid:121 nsid:1 lba:3703442 len:160
nvme0: UNRECOVERED READ ERROR (02/81) crd:0 m:0 dnr:0 p:0 sqid:4 cid:121 cdw0:0
(nda0:nvme0:0:0:1): READ. NCB: opc=2 fuse=0 nsid=1 prp1=0 prp2=0 cdw=388292 0 9f 0 0 0
(nda0:nvme0:0:0:1): CAM status: Unknown (0x420)
(nda0:nvme0:0:0:1): Error 5, Retries exhausted
nvme0: READ sqid:2 cid:127 nsid:1 lba:3703442 len:160
nvme0: UNRECOVERED READ ERROR (02/81) crd:0 m:0 dnr:0 p:1 sqid:2 cid:127 cdw0:0
(nda0:nvme0:0:0:1): READ. NCB: opc=2 fuse=0 nsid=1 prp1=0 prp2=0 cdw=388292 0 9f 0 0 0
(nda0:nvme0:0:0:1): CAM status: Unknown (0x420)
(nda0:nvme0:0:0:1): Error 5, Retries exhausted
ELF interpreter /libexec/ld-elf.so.1 not found, error 5
2026-11-22T02:58:38.994044+00:00 - init 1 - - single user shell terminated, restarting
Enter full pathname of shell or RETURN for /bin/sh:
I have no idea what to make of this. From what I've researched this could be a disk issue.
Anyone have suggestions on next steps?