OPNsense Forum

English Forums => 26.7, 26.10 Series => Topic started by: dmcgough on November 19, 2026, 03:48:30 AM

Title: Feature Request - Gateway Monitoring enhancements
Post by: dmcgough on November 19, 2026, 03:48:30 AM
In my setup, I use 2 fiber connections at home. I use the Gateways feature to fail over from my primary to secondary link. I wish that I had a few more options for specifying what I want to be monitored on that specific link, however.

For example, testing reachability to the gateway address doesn't necessarily tell me I have actual internet reachability. I can manually put in the DNS server from that WAN provider, but I'd rather just be able to click a box and tell it to monitor the DNS server(s) that it received via DHCP on the WAN link. Or maybe the gateway and one or two DNS servers. Maybe don't fail the link til all 3 fail, or fail it as soon as any reachability to any of them fails. Or high packetloss (definable).

I can manually put in a DNS server for each Gateway, but if the provider changes this IP for any reason, my failover configuration may break. If it's on my secondary, I might not notice and I might have the link unintentionally marked down (because it can't reach the now-defunct DNS server) because I didn't check it often enough.

Also I noticed that when I put in an IP as a monitor IP, the system also created a route for it. I'm not sure, but I wonder if that would then force all traffic to that IP out that link - when my actual goal was just to monitor the IP reachability via that WAN link (but not to affect traffic from the inside to that address). Make sense?

Thanks!!