OPNsense Forum

English Forums => 26.7, 26.10 Series => Topic started by: RouterGuy2019 on November 18, 2026, 06:40:44 PM

Title: Speed drops?
Post by: RouterGuy2019 on November 18, 2026, 06:40:44 PM
I have been having an issue for awhile where if I have heavy traffic all at the same time my 1gb connection will start to slow drop in speed until it gets super slow like 1-3mb, sometimes if I wait like 5 mins it will go back to normal speeds on it's own.  But sometimes I have to reboot the modem to get the speed back to normal.  I assumed this was a problem with my ISP, but I was told it was and issue with opnsense (not really opnsense, freebsd and intel NIC's) because of the fact that I have intel 2.5gb NIC's. So I was told to do this...

Uncheck...
Disable hardware checksum offload
Disable hardware TCP segmentation offload
Disable hardware large receive offload

Navigate to System > Settings > Tunables and make sure EEE is disabled for the igc driver, or disable it directly via shell/SSH:

Set hw.igc.eee_setting=0Verification


Hardcode Speed and Duplex

Go to Interfaces > [WAN / LAN] in OPNsense.

Scroll down to Speed and duplex.

Change it from Autosense to 2500base-T Full-Duplex (or match whatever your modem port speed is).

I am just wondering if anyone can tell me if this is sound advice?

Thanks.