Hi guys!
I have had a lot to do recently but wanted to get back to OPNSense to have things setup right:
I have mendtioned before that I have a Intel 49Y4242 IBM Ethernet Quad Port Server Card 94Y5167 49Y4241 low Profile
I use the inbuilt nic for my WAN
The 4 port nic is setup as follows:
Private_LAN
Company_LAN
Private_wifi
Company_wifi
I obviously could have created vlans to do the same job but having the 4 port network card saved that work....
Each port has its own subnet for that network..
To stop my company lan and wifi from talking to private lan and wifi I setup an alias...
Not sure if I did it the right way..
I called it private_networks and in content I added the two private subnets...
The rest as default and saved.
I then created firewall rules to stop the private and company networks from talking to each other..
I then Went to Dnsmasq DNS & DHCP:
General I chose all interfaces apart from WAN
The DNS Listen Poort: 53053
I setup DHCP Ranges for:
Private_LAN: 192.168.11.100 - 192.168.11.200
Company_LAN: 192.168.12.2 - 192.168.12.20
Private_wifi: 192.168.13.100 - 192.168.13.200
Company_wifi: 192.168.14.2 - 192.168.14.20
And that is as far as I have come....
I really don't know how to setup the DHCP Options?
Can someone give me examples from the above configuration?
Should I have done something different?
I am open to suggestions and learning how everything works....
bookie56
Quote from: bookie56 on Today at 01:17:09 PMI really don't know how to setup the DHCP Options?
Can someone give me examples from the above configuration?
Should I have done something different?
I am open to suggestions and learning how everything works....
You could simply start with https://docs.opnsense.org/manual/dnsmasq.html#dnsmasq-dns-dhcp and take it from there ?!