Beste OPNsense-gebruikers,
Vandaag heb ik mijn OPNsense-firewall bijgewerkt naar versie 26.7.3_8.
Sinds deze update kan ik mijn bestaande firewallregels niet meer aanpassen. De optie om een bestaande regel te bewerken/wijzigen is in de webinterface niet meer zichtbaar.
De bestaande firewallregels worden nog wel gewoon weergegeven, maar ik kan deze niet openen om bijvoorbeeld instellingen of vinkjes binnen de regel aan te passen.
Voor de update werkte dit zonder problemen.
Zijn er meer gebruikers die dit probleem ervaren na de update naar OPNsense 26.7.3_8? Is dit mogelijk een bekende bug in deze versie?
Alvast bedankt voor jullie hulp en reacties.
Onderstaande Melding Kreeg ik ik heb uitgevoerd
export naar excel en dan weer inladen en remove all legacy rules
Firewall: Migration assistant
Firewall rules
To switch from the legacy rules to the new rules interface, a migration is needed.
As this can be a risky operation, manual intervention is required.
This module assists you in moving your rules to the new application and offers pointers to
various components available to guide you through the process.
When using a ZFS based setup, you can use snapshots to revert back to the old situation when accidents happen.
The other option is to use configuration history to undo changes or backup your configuration [1].
To prevent being locked out during the process, do not disable the anti-lockout rule and access the machine
via your LAN interface [2].
With all preparations in place, we can export the rules into a format our new rules interface understands [3].
{tip} Use a tool like Microsoft Excel to inspect and modify rules in the CSV file before importing them or when certain validations fail.
Now we can import the existing rules into the new user interface [4].
After validating the rules are as expected, you can remove all legacy rules via [5] which forwards you to the new rules page after completion.
Quote from: sakbari on Today at 10:02:41 AMOnderstaande Melding Kreeg ik ik heb uitgevoerd en opgelost
export naar excel en dan weer inladen en remove all legacy rules
Firewall: Migration assistant
Firewall rules
To switch from the legacy rules to the new rules interface, a migration is needed.
As this can be a risky operation, manual intervention is required.
This module assists you in moving your rules to the new application and offers pointers to
various components available to guide you through the process.
When using a ZFS based setup, you can use snapshots to revert back to the old situation when accidents happen.
The other option is to use configuration history to undo changes or backup your configuration [1].
To prevent being locked out during the process, do not disable the anti-lockout rule and access the machine
via your LAN interface [2].
With all preparations in place, we can export the rules into a format our new rules interface understands [3].
{tip} Use a tool like Microsoft Excel to inspect and modify rules in the CSV file before importing them or when certain validations fail.
Now we can import the existing rules into the new user interface [4].
After validating the rules are as expected, you can remove all legacy rules via [5] which forwards you to the new rules page after completion.