I updated to version 26.7. It works for a couple of minutes and then freezes.
The SSH and the web interface stop working, and the entire network goes down. The video output also freezes, making it impossible to type anything.
I'm using a Ryzen 3700X with a Mellanox ConnectX-4 NIC.
I didn't have this bug on the previous version.
I tried some settings like:
- Disable PowerD
- Change hw.acpi.cpu.cx_lowest=C1
- Change machdep.idle=spin
I also noticed that the "Load" is VERY HIGH. Even before any change, the "Load Average" (from top) was 0.1~2.0, the "CPU Load" on OPNSense UI chart was usually around min. 1 max. 5. Now, the Load Average is "16.66, 13.33, 7.24" and the OPNSense UI reports min. 18 max. 81.
I think the issue is somehow related to l0:
lo0 in 1.090 GB/s 1.092 GB/s 554.198 GB
out 1.090 GB/s 1.092 GB/s 554.198 GB
I don't think 1GB/s is correct. I'm not sure why that is happening.