Print Page - System Backup - os-git-backup - uses Tayga interface to access Github

Title: System Backup - os-git-backup - uses Tayga interface to access Github
Post by: IsaacFL on July 30, 2026, 07:22:32 PM

I recently installed the os-git-backup for system backup. I created a private repository on GitHub and have it working via SSH to GitHub.

I do have the firewall log outgoing port 22 and I notice that it is going out via the Tayga interface. It works, but that seems odd as the Opnsense router has working IPv4?

Title: Re: System Backup - os-git-backup - uses Tayga interface to access Github
Post by: Maurice on August 01, 2026, 06:26:23 PM

Did you enable DNS64? Then it's expected behavior. IPv6 is generally preferred over IPv4 and it doesn't matter whether the destination address is a "native" IPv6 address or an address synthesized by DNS64.

Cheers
Maurice

Title: Re: System Backup - os-git-backup - uses Tayga interface to access Github
Post by: IsaacFL on August 06, 2026, 05:49:29 PM

I do have DNS64 enabled but was just surprised that the router itself was using NAT64 internally. It seems to work, was just worried I had misconfigured it.

Title: Re: System Backup - os-git-backup - uses Tayga interface to access Github
Post by: Maurice on August 07, 2026, 12:41:00 AM

If you don't want OPNsense itself to use NAT64, then you need to configure a DNS server without DNS64 in System / Settings/ General.

OPNsense Forum

English Forums => 26.7 Series => Topic started by: IsaacFL on July 30, 2026, 07:22:32 PM