Text only | Text with Images

OPNsense Forum

English Forums => 25.7, 25.10 Legacy Series => Topic started by: db9 on May 10, 2026, 09:22:16 AM

Title: Assign Firewall rules to multiple interfaces - rules (new) filter issue
Post by: db9 on May 10, 2026, 09:22:16 AM
If I assign firewall rule to multiple interfaces it will not show up in the rules (new) for that specific interface but only if all rules is selected as filter.

It would be nice if the rules (new) filter would show rules that will match the filter for the interface . It would be a good alternative for firewall (interface) group.

Feature request?!
Title: Re: Assign Firewall rules to multiple interfaces - rules (new) filter issue
Post by: Monviech (Cedrik) on May 10, 2026, 09:49:52 AM
Press "Inspect"

It will show the full ruleset for an interface.
Title: Re: Assign Firewall rules to multiple interfaces - rules (new) filter issue
Post by: db9 on May 10, 2026, 09:56:30 AM
Quote from: Monviech (Cedrik) on Today at 09:49:52 AMPress "Inspect". It will show the full ruleset for an interface.

Why not via the filter, it's more obvious. It will also not show up in the other interface view.

Title: Re: Assign Firewall rules to multiple interfaces - rules (new) filter issue
Post by: Monviech (Cedrik) on May 10, 2026, 10:29:17 AM
The filter logic is quite complicated already, and Inspect is quite performance heavy thats why it's a separate toggle.

Also I don't understand, if you e.g., select your LAN interface in the filter, and press Inspect, what exactly is missing? Are there any floating rules missing that have LAN selected?
Text only | Text with Images