Hi Everyone,
Please accept my apologies for asking a newbie question here - I'm sure you're up to your necks with far greater matters.
I'm trying to setup the following connection using OPNSence 26.1 installed on a VPS (with root access):
Wireguard (In) -> VLAN (Intermediary) -> LAN (Public IP)*
*Note: I only have the 3 interfaces with no WAN present
I've been through the OPNSense manual and followed every guide I could find online but nothing works.
The Wireguard instance doesn't accept connections at all - there's no Handshake. I have set up and instance, then Interfaces: Assignments, assigned Outbound NAT and Firewall rules, double, triple and quadruple-checked the instance, keys, and ports. Nothing.
I also get the following error using Firewall Rules:
There were error(s) loading the rules: /tmp/rules.debug:137: direction must be explicit with rules that specify routing - The line in question reads [137]: pass on wg0 route-to ( vlan01 10.6.5.0 ) inet from {(wg0:network)} to {(vlan01:network)} keep state ( no-sync ) label "dd6671fc-4a3b-4e9e-bf4c-f9f624c74090" # WG0-VLAN
When I change the "state" condition I get the same error but for the state condition I selected i.e. synproxy, modulate, sloppy, no state. The error is the same regardless of selected state.
Could someone point me to something the right direction please? Thank you
Apologies for the mistakes in my post - I've had a very long 3 weeks.
Corrections:
1. "I have set up and instance" = I have set up an instance
2. "Could someone point me to something the right direction please?" = Could someone point me in the right direction please?
Thank you