I have the following rules created by default, exported then imported in the new Rues [new] (I followed the migration assistant)
My LAN is a bridge of all Ethernet except for the WAN, but in order for any PC within the LAN be able to communicate with another member of the LAN I need a 3rd rule (1st on the screenshot), if I specify the LAN as interface, it doesn't work (tested with basic ping), in other words, it is only working in the way it is in my current screenshot:
(https://pasteboard.co/dw3zUfPfaK0e.png)
Did you set the two mandatory tunables as documented?
Quote from: Patrick M. Hausen on February 11, 2026, 06:29:30 PMDid you set the two mandatory tunables as documented?
No, pretty new to OPNSense, everything is working though, I have AdGuard, moved to Chrony, I have firewall rules for DNS and time server, care to tell what I need to check and where? I have just a basic network, bridged LAN ports + WAN with VLAN required by my ISP.
If you follow the official documentation for creating a LAN bridge, specifically step six, that will fix your problem.
https://docs.opnsense.org/manual/how-tos/lan_bridge.html
Quote from: Patrick M. Hausen on February 11, 2026, 06:34:46 PMIf you follow the official documentation for creating a LAN bridge, specifically step six, that will fix your problem.
https://docs.opnsense.org/manual/how-tos/lan_bridge.html
Perfect, that worked, thank you very much, I should had gone to the official doc first, I didn't think it needed a tweak and that's on me ;-)