Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: coffeecup25 on November 12, 2025, 04:04:37 PM

Title: How to move Adguard Home config to new install
Post by: coffeecup25 on November 12, 2025, 04:04:37 PM
I am planning to add a spare router and put OPNsense on it. I'll restore a backup from my current one for the main configuration.

My question involves Adguard Home.

I will load it from the OPNsense support site that offers it (I have to look it up so I'll be vague at this time about that.)

To configure, can I simply replace AdguardHome.yaml with one that's in current use and expect it to work normally from that point on? WinSCP seems to work well for  jobs like that. I remember it being a monster to hand configure the first time. Especially using 2 subnets.

Thanks in advance.
Title: Re: How to move Adguard Home config to new install
Post by: Patrick M. Hausen on November 12, 2025, 04:11:53 PM
Copying AdguardHome.yaml will definitely do all necessary configuration. For installation refer to:

https://www.routerperformance.net/opnsense-repo/

HTH,
Patrick
Title: Re: How to move Adguard Home config to new install
Post by: coffeecup25 on November 12, 2025, 04:40:15 PM
Quote from: Patrick M. Hausen on November 12, 2025, 04:11:53 PMCopying AdguardHome.yaml will definitely do all necessary configuration. For installation refer to:

https://www.routerperformance.net/opnsense-repo/

HTH,
Patrick

Thanks. Nice to see you again. Calmer times now.

Edit a couple days later:  Everything worked like clockwork. Thanks.
Text only | Text with Images