Print Page - Engine starts and stops

Title: Engine starts and stops
Post by: mike19 on July 21, 2025, 09:33:03 PM

Hi all,

I'm trying to configure Zenarmor.
After installation the engine starts and stops after some seconds. Same if I start the engine manually.
The log in the WebGui only says engine started / stopped but not why.
Are there any more logs? Did someone had the same problem?

Best regards and many thanks,
Mike

Title: Re: Engine starts and stops
Post by: Cicada on July 22, 2025, 08:46:13 PM

I originally wrote how I have the same problem. And then I found the answer:

https://forum.opnsense.org/index.php?topic=47283.0

Title: Re: Engine starts and stops
Post by: sy on July 24, 2025, 03:45:10 PM

Hi Mike,

Has this resolved your issue?

Title: Re: Engine starts and stops
Post by: mike19 on July 24, 2025, 07:19:17 PM

Hi thanks for the reply
I will test and report back!

Title: Re: Engine starts and stops
Post by: mike19 on July 24, 2025, 07:48:11 PM

Yeeesssss it is working!
Did the tunables only = not working
Tunables + MTU = working

Thanks for the help!!!

Cheers Mike

OPNsense Forum

English Forums => Zenarmor (Sensei) => Topic started by: mike19 on July 21, 2025, 09:33:03 PM