About a week ago I installed OPNsense with Zenarmor (Home) on a Topton mini pc.
Everthing worked fine untill a problem occurred with a wired TV settopbox
At first the image freezed and later the images where played at high speed.
Then the STB gave a warning that there was no internet. It still does.
The STB received an IP adress and a connectivitytest on the STB showed no issues.
(I have little network knowledge and just started with OPNsense)
Connecting the STB with the ISP modem works fine.Versions:
- OPNsense 25.1.5_4-amd64
- FreeBSD 14.2-RELEASE-p2
- OpenSSL 3.0.
Topton mini PC:
- Celeron J4125 CPU with 8 MB memory, 40% in use.
- Is behind the ISP router in bridge mode
- Three ports in use:
Igc0, cable from ISP modem (IN)
Igc1, cable to switch (OUT), which is connected with STB
Igc3, cable to ISP modem for login
I have tried:
- Reset STB, switch, ISP modem, Topton mini pc.
- Changed UTP cable from STB to wallmount.
- Connected STB with other switch.
- Other STB (upstairs) shows the same issue.
- Packets captured imported in Whireshark. See Attach_1 and Attach_2 (I am unfamiliar with Whireshark)
- OPNsense and Zenarmor logfiles viewed. No blocked hosts (Dynamic DNS)
- Removed Topton mini pc igc3 cable
- STB ping from Topton:
55 packets transmitted, 55 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.856/1.014/1.823/0.121 ms
Does anyone have an idea ?