Hi there.
I have had no luck in configuring opnsense wireguard as a client in a site to site config.
I already have a wireguard server at home and i want to set up opnsense wireguard as a client on a separate network.
I get it working as a container on proxmox on the lan side of opnsense easily, but also curious how to get it working
on the opnsense server instead so i could tunnel all vm traffic through it if i want to.
Has anyone tried this and got it working?
Thank you
We would need a bit more information, like a drawing (ASCII or graphic) of how your network layout is.
Proxmox is on OPNsense LAN, where is your Wireguard server?
My home network is just a raspberry pi behind a router with a port forward to the pi. The other network is proxmox behind opnsense firewall on the lan side.
Currently i have a working setup where a container on proxmox connects as wireguard client site to site to the pi at home (which acts as the wireguard server). But i can't get it working on opnsense using wireguard for some reason.
We need all details of the configuration you did on OPNsense ...
Quote from: raecer on April 14, 2025, 03:47:07 PMMy home network is just a raspberry pi behind a router with a port forward to the pi. The other network is proxmox behind opnsense firewall on the lan side.
And I would add to what Patrick wrote: how are home network and the OPNsense connected. Really, somed kind of diagram helps.
I explained it to chatgpt and got it working via the steps suggested. thank you anyway