Hello everyone,
I have recently switched to a combination of Draytek Vigor 165 and OPNsense. The Internet runs via PPPoE so far. I have a VDSL connection with O2.
I mainly want to understand where the following messages/errors are coming from and if I can fix them.
If you need any further information, please let me know.
The devices are connected as follows:
(https://i.imgur.com/NIklGei.png)
I have now noticed two things in the OPNsense interface:
- On the one hand, I have a constantly recurring error in the logs under System->Log Files->General
/usr/local/etc/rc.newwanipv6: Interface '' (igb2) is disabled or empty, nothing to do.
igb2 is the wan interface.
(https://i.imgur.com/zIBbhmo.png)
- The firewall seems to constantly block a broadcast message from the Draytek modem. The modem is running in bridge mode.
According to the NDP table, the source IPv6 corresponds to the Draytek modem. I have deactivated the logging of Default block and Default pass.
(https://i.imgur.com/a9MyHgY.png)
firewall logs
(https://i.imgur.com/xzeKElr.png)
firewall detail
(https://i.imgur.com/a9MyHgY.png)
firewall log settings
(https://i.imgur.com/sXdoE6q.png)
interfaces
(https://i.imgur.com/EIz64HL.png)
vlan
(https://i.imgur.com/IQexEbv.png)
pppoe device
(https://i.imgur.com/SfqzH5J.png)
wan interface part 1
(https://i.imgur.com/VcDIly1.png)
wan interface part 2
(https://i.imgur.com/GsEGkLK.png)
general logs
(https://i.imgur.com/zIBbhmo.png)
ndp table
(https://i.imgur.com/kdGC7ut.png)
draytek 1
(https://i.imgur.com/8y3cDII.png)
draytek 2
(https://i.imgur.com/dOc04dI.png)
Translated with DeepL.com (free version)
Unplug port 2 and use this link to get GUI access to Draytek https://forum.opnsense.org/index.php?topic=36936.msg180650#msg180650