Text only | Text with Images

OPNsense Forum

English Forums => Hardware and Performance => Topic started by: foss-johnny on January 28, 2025, 08:56:04 PM

Title: Intel I350-T4 V2 - Not detected by FreeBSD
Post by: foss-johnny on January 28, 2025, 08:56:04 PM
Hello,

I recently purchased a Lenovo P330 Tiny and a I350-T4 V2 Quad 1Gbps PCIe network card.

After installing the card and Opnsense v24.7 the I350-T4 card is not detected.

As Opnsense OS is loading I can see the following error flash by during the boot process. (see attached photo).

Does anyone know what's required to get the card working?

Thanks

Title: Re: Intel I350-T4 V2 - Not detected by FreeBSD
Post by: Patrick M. Hausen on January 28, 2025, 09:21:56 PM
Possibly that card is so old it needs a firmware update?

https://www.intel.com/content/www/us/en/support/articles/000005790/software/manageability-products.html
Title: Re: Intel I350-T4 V2 - Not detected by FreeBSD
Post by: foss-johnny on January 29, 2025, 01:59:05 AM
Quote from: Patrick M. Hausen on January 28, 2025, 09:21:56 PMPossibly that card is so old it needs a firmware update?

https://www.intel.com/content/www/us/en/support/articles/000005790/software/manageability-products.html

Thank you Patrick. That was indeed the problem precisely. After upgrading the firmware Opnsense detects the card correctly.
Title: Re: Intel I350-T4 V2 - Not detected by FreeBSD
Post by: Greg_E on January 29, 2025, 03:40:09 PM
Hmmm... I may need to start going through my NICs and checking/updating things.

I hope it runs under WinPE like the HBCD. Too bad they didn't make a bootable version.
Text only | Text with Images