Print Page - Update from 24.7.11

Title: Update from 24.7.11_2 to 24.7.12 fails
Post by: Meg on January 23, 2025, 05:38:59 AM

I cannot update from 24.7.11_2 to 24.7.12 either from gui or cli. It freezes during installation. I tried disabling crowd sec as I have read that crowdsec can cause installation problems. When 25.1 comes out will I be able to skip 24.7.12 and update directly to 25.1 , or do I need to have 24.7.12 before upgrading.

Title: Re: Update from 24.7.11_2 to 24.7.12 fails
Post by: newsense on January 23, 2025, 07:55:07 AM

Can you do a healthcheck and post it here to see where you're at ?

Title: Re: Update from 24.7.11_2 to 24.7.12 fails
Post by: Meg on January 24, 2025, 02:54:50 AM

Thanks for the reply. I did the health check and found I had quite a few package mismatching versions. I corrected them and the update went smoothly.

Title: Re: Update from 24.7.11_2 to 24.7.12 fails
Post by: peterwkc on January 24, 2025, 01:32:16 PM

Glad you solved your problem

OPNsense Forum

English Forums => 24.7, 24.10 Series => Topic started by: Meg on January 23, 2025, 05:38:59 AM