I've got a networked CyberPower UPS that I'm trying to get to work with the NUT plugin for OPNSense.
See attached images for most details but here's a few not shown:
I'm using the netclient "UPS type" (all others are unchecked).
Nut account settings (dropdown under general settings are blank).
- Services: Nut: Diagnostics page in web UI is blank.
This is what I see in a terminal that I have open:
```
Broadcast Message from root@OPNsense01
(no tty) at 14:42 EST...
UPS user@192.168.20.21:80 is unavailable
```
Are there any log files I should be looking at?
Any obvious settings missing?
I did find this post, but it's about a USB connection, not a networked UPS. So it looks like cyberpower is supported, at least somewhat.
https://forum.opnsense.org/index.php?topic=22203.0
You should probably use SNMP. Works without a problem with an RMCARD205 (https://www.cyberpowersystems.com/product/ups/hardware/rmcard205/). See screenshot.
Gave that a try and I'm not seeing anything in Diagnostics -- so I assume it's still not working?
I disabled netclient & have the following configs for SNMP.
Enabled SNMP in the RMCARD web UI?
That would probably help. It LOOKED enable (allowed access but no access control as allowed) but was not. I enabled version 1 of SNMP instead of 3 (UPS had both) since 3 required authentication.
That aside, still not seeing anything in the NUT web UI for UPS status.
Noticed something else: on the NUT page in OPNSense the service looks like it's running -- however on the OPNSense dashboard it does not report to be running. So perhaps there's a config issue? I don't know what to look at, and there's precious little to click around in. I do not believe this was happening before, and it also takes longer to let me back to the page when I click refresh NUT tool.