Hello everyone!
I'm having a problem doing port redirection.
I have 2 links, each with its gateway (WAN - GWWAN / WAN2 - GWWAN2).
For example, using WAN, when I make a target so that when a packet hits port 5555 of the WAN, it is routing to the IP 172.16.100.10 on port 22. That works fine there. I am using the Filter rule association = Add associated filter rule option.
When I create the same rule, but using WAN2, it does not work. Only works when Filter rule association = Passed
Note: The default gateway is GWWAN.
Below are the rules.
Firewall: NAT: Port Forward
If Proto Address Ports Address Ports IP Ports Description
WAN TCP * * This Firewall 5555 172.16.100.10 22 (SSH)
WAN2 TCP * * This Firewall 5555 172.16.100.10 22 (SSH)
Firewall: Rules
Tab WAN
Proto Source Port Destination Port Gateway Schedule Description
IPv4 TCP * * 172.16.100.10 22 (SSH) * NAT
Tab WAN2
Proto Source Port Destination Port Gateway Schedule Description
IPv4 TCP * * 172.16.100.10 22 (SSH) * NAT
Am I doing it wrong or having a problem?
Thank you all!