Hello,
since the last update to 24.7.11_2, the firewall live view doesn't show a lot of information that were shown before.
For example if from my pc I try to ping the printer, I see nothing on live vew (also filtering by source or destination).
I am missing something? Maybe I changed some settings?
This is a huge problem for me as this is the main tool I use to identify blocks in the internal network.
Thanks a lot
Do you mean in the widged? Or in the Panel/TAB of live view?
Cause the Widged had adjusted poll interval, it doesn't spam so much anymore.
The TAB itself works. Bellow a picture with applied filter.
Regards,
S.
Hi, I am referring to the tab itself.
Until some time ago it worked perfectly, now I do not know what happened.
I implemented many roules at Floating level, but I think those shouldn't affect the Live view page (or not?).
My understanding is that the live view shows any communications passing through the interfaces.
Yes you should see as well Floating rules, e,g any rules, but they need to be logged.
Do you have those rules set to be logged? (the small i icon next to the rule)
Regards,
S.
Ok, I found the issue....I am not sleeping enough: I left active the VPN client on the pc, so everything was routed through that before reaching the opnsense.
Disabling it, the printer was reachable again and the live view was working again (even without flagging the the log option on the single rules).
Next time that the live view doesn't show everything as usual, I will try to activate the log flag on every rule and double check if it does resolve the issue.
Thank you @Seimus
Glad you found the problem.
Please mark your topic with [SOLVED]
Regards,
S.