Text only | Text with Images

OPNsense Forum

English Forums => 24.7, 24.10 Legacy Series => Topic started by: vigeland on December 09, 2024, 12:13:00 PM

Title: No Access to router after update to 24.7.10
Post by: vigeland on December 09, 2024, 12:13:00 PM
After updating to the latest version (10), ipv4 no longer works in Lan, so as a rule strikes. I have been able to reproduce this. Old version installed, backup restore, everything works, then update, Lan dead again. DHCP assigns IP addresses.
It could be due to wiregard, a ping from a computer with a fixed IP to the router goes through the ping for a while until the interface of Wiregard is started (looks like this on the boot screen). However, the interface is not activated in the GUI.
Does anyone have an idea what this could be?

Thanks
Title: Re: No Access to router after update to 24.7.10
Post by: tops4u on December 09, 2024, 12:40:01 PM
Similar Problem?
https://forum.opnsense.org/index.php?topic=44531.0
Title: Re: No Access to router after update to 24.7.10
Post by: vigeland on December 09, 2024, 01:30:23 PM
Yes, could be the same. I use VLAN to on the LAN Net.
Text only | Text with Images