Text only | Text with Images

OPNsense Forum

English Forums => 24.7, 24.10 Legacy Series => Topic started by: JamesW on October 18, 2024, 10:05:52 PM

Title: Boot loop following update
Post by: JamesW on October 18, 2024, 10:05:52 PM
Updating today has resulted in a boot loop failure.

Code Select
SeaBIOS (version v1.0.6-0-g03bdbca)
coreboot version v4.12.0.3
Booting from Hard Disk...
gptboot: No /boot/loader on 0:ad(0p3)

Is the last message displayed on the console, before entering the loop again.

Any ideas or suggestions would be appreciated.

I'm downloading the ISO in case I have to reinstall. :(
Title: Re: Boot loop following update
Post by: Patrick M. Hausen on October 18, 2024, 10:15:19 PM
Reinstall. With ZFS preferrably.
Title: Re: Boot loop following update
Post by: JamesW on October 18, 2024, 11:22:14 PM
I only have a single SSD in a Protectli, ZFS do me any good with this constraint?
Title: Re: Boot loop following update
Post by: Patrick M. Hausen on October 19, 2024, 12:17:19 AM
Of course. Checksums, snapshots, ... ZFS is in about any conceivable way superior to UFS. And it does not break as easily in case of e.g. a power failure.
Text only | Text with Images