Hello,
I added 3 different VPN connections (same provider) and create a gateway group to use them with a fail-safe logic.
vpn1->vpn2->vpn3->normal wan
Generally speaking ii followed the "road warrior" guide with some slight modifications.
My question is if I should change the rules inside the NAT area and the Firewall-Floating using only the gateway group. If yes, how shoud I change them?
Thank you
Gateway group
(https://i.postimg.cc/BtH3z0f9/gateway-group.jpg) (https://postimg.cc/BtH3z0f9)
NAT outbound
(https://i.postimg.cc/bSxjSQ9N/NAT-OUTBOUND-rules.jpg) (https://postimg.cc/bSxjSQ9N)
Firewall floating rules
(https://i.postimg.cc/5QdVtPvR/floating-rules.jpg) (https://postimg.cc/5QdVtPvR)
Firewall subnet rules
(https://i.postimg.cc/r0tTM6d4/firewall-rules.jpg) (https://postimg.cc/r0tTM6d4)
+1
It would be helpful if some 'expert' would shed light on that, thanks.
@hushcoden I tried to switch everything towards the GW group, but the internet connection was no more available so I went back to previous configuration. Yes, it would be really helpfull if someone with experience could answer to my question.