Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: craigiebaby on September 10, 2024, 11:56:25 PM

Title: Easiest configuration for a Fibre PPPOE via a VLan400
Post by: craigiebaby on September 10, 2024, 11:56:25 PM
Good day all,

Does anyone know the easiest OPNsense setup for my fibre PPPOE over a VLan400 to provide internet to my home.
1 x Lan port and 1 x Wan port. Cable running from my Cudy media converter Lan port and from my wan port to my switch.
Tried setting up from wizard with all the neccesary and added a VLan400. Still not getting internet into my OPNsense PC.
Title: Re: Easiest configuration for a Fibre PPPOE via a VLan400
Post by: bartjsmit on September 11, 2024, 07:45:37 AM
Is the switch managed? You could tag the fibre port with VLAN 400 and make the OPNsense WAN port an untagged member of that VLAN.
Title: Re: Easiest configuration for a Fibre PPPOE via a VLan400
Post by: craigiebaby on September 11, 2024, 11:39:17 AM
Hi bartjsmit,

I will give that a try thanks.
Text only | Text with Images