Print Page - How allow Lan1 to access devices on Lan2

Title: How allow Lan1 to access devices on Lan2
Post by: wallnas on August 27, 2024, 09:42:31 PM

I have configured Lan1 192.168.10.254 and Lan2 192.168.12.254.
I have to access, according to LAN 1 to the Lan2 devices.

To do this I inserted the following rule on firewall, rules, lan1

Action: Pass
Interface: Lan1
Direction: in
Source: Lan1 net
Destination: lan2 net

Save, Apply

When I insert on browse the ip lan 2 192.168.12.20:88 : not access

What mistake do I make?

Title: Re: How allow Lan1 to access devices on Lan2
Post by: Patrick M. Hausen on August 27, 2024, 09:51:45 PM

Does the device on 192.168.12.20 have 192.168.12.254 as its default gateway? Are all netmasks on all devices /24 aka 255.255.255.0?

Title: Re: How allow Lan1 to access devices on Lan2
Post by: wallnas on August 28, 2024, 12:07:50 PM

Hi Patrick,
the device 192.168.12.20 have 192.168.12.254 as gateway, netmasks is /24

OPNsense Forum

English Forums => General Discussion => Topic started by: wallnas on August 27, 2024, 09:42:31 PM