OPNsense Forum

English Forums => 24.7, 24.10 Legacy Series => Topic started by: ProfHaase on August 12, 2024, 12:35:09 PM

Title: Update 24.1.8 to 24.7 failed
Post by: ProfHaase on August 12, 2024, 12:35:09 PM
Hello everyone,

I have been using OpnSense for 3 years on a SuperMicro mainboard (A2SDi-4C-HLN4F) with an Intel Atom C3558 CPU. Everything worked great until today, every update went smoothly.

Today I updated from version 24.1.8 to 24.7 and after that the firmware no longer boots. If I go back to the old kernel, OpnSense boots again.

The following error appears in a continuous loop:
(ada0:ahcich10:0:0:0): Error 5, Unretryable error
(ada0:ahcich10:0:0:0): READ_FPDMA_QUEUED. ACB: 60 07 70 eb 40 16 00 00 00 00 00
(ada0:ahcich10:0:0:0): CAM status: Auto-Sense Retrieval Failed



What can I do here?

Thank you very much!
Title: Re: Update 24.1.8 to 24.7 failed
Post by: doktornotor on August 12, 2024, 12:36:47 PM
Your drive seem broken.
Title: Re: Update 24.1.8 to 24.7 failed
Post by: ProfHaase on August 12, 2024, 12:41:13 PM
That's how I interpreted it too.
What I find strange is that it works normally with the old kernel.
Title: Re: Update 24.1.8 to 24.7 failed
Post by: newsense on August 12, 2024, 04:50:52 PM
Nothing strange, the drive has errors.

Best course of action is to backup the config and replace the drive
Title: Re: Update 24.1.8 to 24.7 failed
Post by: jcsp101 on August 12, 2024, 06:14:56 PM
I had a weird error myself - I updated over the webui, and after updating internet was down, and another update was available, back to 24.1 from 24.7 if i recall correctly?

this was late last night so i just accepted that update which seemed to roll it back and all is working now again, but curious if it's worth a shot to try the update to 24.7 again over the webui