I just noticed, that the ntp-server in 24.7 seems to have a problem getting time from the configured servers.
And this seems to be the case with all of the four instances, that I take care of.
Below all of the 4 configured time-sources say Unreach/Pending..
Does anybody have a clue about this?
Unreach/Pending 0.dk.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 1.dk.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 0.opnsense.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 0.debian.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Active Peer 194.45.79.110 185.181.223.169 2 u 23 64 177 10.386 -0.403 0.087
Unreach/Pending 217.116.227.3 149.117.239.139 2 u 23 64 177 5.703 -0.526 0.212
Unreach/Pending 193.200.91.90 192.38.7.240 2 u 16 64 167 3.396 -0.775 0.057
Unreach/Pending 5.186.56.205 217.198.219.102 2 u 19 64 177 1.912 -0.054 1.106
Unreach/Pending 213.32.246.229 22.75.108.217 3 u 19 64 177 8.765 -0.594 2.588
Unreach/Pending 185.197.135.6 131.188.3.220 2 u 14 64 177 19.042 -9.833 8.598
Unreach/Pending 213.5.39.34 123.19.30.227 2 u 17 64 177 2.459 -0.334 0.230
Unreach/Pending 162.159.200.1 10.65.8.14 3 u 10 64 177 4.502 -0.927 0.036
I just want to add that
ntpdate 0.opnsense.pool.ntp.org
0 Jul 08:39:30 ntpdate[1280402]: adjust time server 192.53.103.108 offset +0.000235 sec
from the same network works just fine. So it's not that these time-sources are down or something...
In Services > Network time > General
Can you show your config?
Regards,
S.
Absolutely.
It's very basic. And apart from the page in the attachment, everything is default settings, as far as I know.
Hans Otto
Config looks good,
You are saying here that these servers dont get time sync from ?
QuoteUnreach/Pending 0.dk.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 1.dk.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 0.opnsense.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
Unreach/Pending 0.debian.pool.ntp.org .POOL. 16 p - 64 0 0.000 +0.000 0.000
But when you check the list further you can see there are stats and times on the IPs. These domains are just pools. After DNS resolution get an IP and the stats and time are showed on those.
Actually this has been there before 24.7, I have seen same on 24.1.
QuoteActive Peer 194.45.79.110 185.181.223.169 2 u 23 64 177 10.386 -0.403 0.087
Unreach/Pending 217.116.227.3 149.117.239.139 2 u 23 64 177 5.703 -0.526 0.212
Unreach/Pending 193.200.91.90 192.38.7.240 2 u 16 64 167 3.396 -0.775 0.057
Unreach/Pending 5.186.56.205 217.198.219.102 2 u 19 64 177 1.912 -0.054 1.106
Unreach/Pending 213.32.246.229 22.75.108.217 3 u 19 64 177 8.765 -0.594 2.588
Unreach/Pending 185.197.135.6 131.188.3.220 2 u 14 64 177 19.042 -9.833 8.598
Unreach/Pending 213.5.39.34 123.19.30.227 2 u 17 64 177 2.459 -0.334 0.230
Unreach/Pending 162.159.200.1 10.65.8.14 3 u 10 64 177 4.502 -0.927 0.036
Regards,
S.
Hi Seimus
Yeah, it's me being ignorant here, I guess.
I just noticed, that I got quite a few messages from hosts on the network, that I'm managing today.
Messages about time-drifts. And these machines synchronize with the OPNSense-box in question.
So I investigated, and this ntpd-status inopnsense seemed strange.
But of course you are right, that these entries are not resolving to real ip's, since they are pools.
Why the have chosen to show them in the status as failing/pending is a design choice, I guess.
Why these hosts of mine are complaining must me some kind of coincidence, that I will investigate further.
Thanks for your help and attention :)
Hans Otto