OPNsense Forum

English Forums => 24.7, 24.10 Legacy Series => Topic started by: ramikilany on July 29, 2024, 09:24:53 AM

Title: NAT stops working
Post by: ramikilany on July 29, 2024, 09:24:53 AM
After the upgrade to the latest version (24.7) I can not access any of my web GUI through the WAN interface which with the same IP before the upgrade was working very will.
Title: Re: NAT stops working
Post by: Saarbremer on July 29, 2024, 10:16:04 AM
Did you check the firewall logs if something got blocked and why?
Title: Re: NAT stops working
Post by: Monviech (Cedrik) on July 29, 2024, 10:22:33 AM
https://docs.opnsense.org/manual/settingsmenu.html#listen-interfaces
Title: Re: NAT stops working
Post by: ramikilany on July 29, 2024, 10:56:34 AM
In firewall rules generally I don't see any problems, also what I did I created a full access rule in the firewall on WAN and allow every thing, same issue can not access from external links our servers.
Title: Re: NAT stops working
Post by: NarCico on July 30, 2024, 06:21:25 AM
Hi,
I've also updated from 24.1 to the latest OPNSense version 24.7_x and I suffer the same issue. (almost)
I have an internal NGINX Proxy Manager that respond to TCP 443 via a NAT rule from internet, and all the websites he manages (internal hosts) are unreachable after the upgrade.
Obviously OPNSense web GUI is listenng on HTTP on port 85 and HTTPS is not used for web GUI.
I really don't understand what is goin on here...
Any help would be really appreciated.
Cheers.
Title: Re: NAT stops working
Post by: ramikilany on August 01, 2024, 12:29:01 PM
any news?
Title: Re: NAT stops working
Post by: franco on August 01, 2024, 02:15:09 PM
I was hoping you would tell us about your efforts to narrow this down?


Cheers,
Franco
Title: Re: NAT stops working
Post by: zyon on August 23, 2024, 03:27:56 PM
Same here after update 24.7.2 all of my children can't use there console anymore..

Trying to recreate rule etc nothing ...
I installed UPNP, there are ports in it but it doesn't seem to work

No error or log for help :s
Title: Re: NAT stops working
Post by: doktornotor on August 23, 2024, 03:38:48 PM
Quote from: zyon on August 23, 2024, 03:27:56 PM
Same here

Uhm, no... this issue was about accessing firewall webgui via WAN IP.
Then, someone came pulling in some undescribed nginx reverse proxying.
Then you came to pull in UPnP and gaming consoles.

Start your own topic with some useful data beyond "it broke after upgrade".
Title: Re: NAT stops working
Post by: zyon on August 23, 2024, 06:28:23 PM
Thanks Dok ......................
Title: Re: NAT stops working
Post by: JakubJB on September 30, 2024, 12:08:59 PM
There's definitely an issue after upgrade. I lost all NAT rules. After comparing config files before and after I see that new empty section showd up:

      <Filter version="1.0.3">
        <rules/>
        <snatrules/>
        <npt/>
      </Filter>

In "before" config all rules are int <nat> section and they're present also in "after"one, but are obviously ignored.
After adding 1:1 rule it show under new section mentioned above, but in not visible before, but named the same as in older config: <onetoone>