Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: peter.pan17 on April 25, 2024, 04:38:56 PM

Title: Missing Generic Configuration section for VLAN interfac, not able to enable DHCP
Post by: peter.pan17 on April 25, 2024, 04:38:56 PM
Hi folks,

can you please advise, I am a newbee trying to configure VLANs in OpnSense version 20.7 (under GNS3).

I follow this guide:
https://www.zenarmor.com/docs/network-security-tutorials/how-to-configure-vlan-on-opnsense

However, I am unable to perform step "4. Setting Up a Static IPv4 Address for the VLAN" because the Generic configuration section is missing/not available under the specific VLAN inteface, there is only Basic configuration available.

Any idea where/how this can be enabled?

Many thanks,
Daniel
Title: Re: Missing Generic Configuration section for VLAN interfac, not able to enable DHCP
Post by: Taunt9930 on April 26, 2024, 08:22:31 AM
Have you clicked save?
Title: Re: Missing Generic Configuration section for VLAN interfac, not able to enable DHCP
Post by: peter.pan17 on April 26, 2024, 10:33:14 AM
Actually, I managed to sort this out. Seems some glitch within the client browser (Firefox).

When I installed Chromium as an appliance and connected from it to OpnSense web GUI then the section was displayed correctly.

Hence this topic can now be closed.

Thank you for your reply anyway.
Text only | Text with Images