When I run audit connectivity test, the first time I run the test, IPV4 success is 100% and IPV6 is 75% (4 packets transmitted, 3 packets received, 25.0% packet loss). If I repeat the test, both results are 100% success.
Really there's no problem in any connectivy but it's a bit strange.
Greetings
Well, did you check with your ISP/connection?
That reminded me on some automatic dial-up back in the early 2000s that would be triggered by the first packet to go out.
I don't know exactly what you mean with my ISP/connection... but i have tried pinging to many ipv6 sites without any problem. It just happens with the connectivity audit when it has been some time "resting". If I retry inmediately after the failed test, everything is OK.
Greetings
I get the same issue on the IPv6 test. My IPv6 is via a WireGuard tunnel, but other than that test...works perfect.