I wonder why in the Service menu the settings for RA are not visible. The demon Radvd seems running but can't set any parameter. OPNsense is on actual version as per March 2024.
I want to check which mode the RA might try as I continue struggle to get proper address for a router I have to use. That router get a /56 from ISP and is able to give a /60 to a consumer router right drive my wifi. But want to set OPNsense box also on a different /60.
Is there anything in addition to install to get that menu entry ?
You have to enable "Manual configuration" in the "Track IPv6 Interface" settings. Otherwise, RA and DHCPv6 settings are autoconfigured with known good values for basic use cases.
Cheers
Maurice
Yeah, just noticed too after I reinstalled :-\
But thanks for the help :)