OPNsense Forum

English Forums => 24.1 Production Series => Topic started by: bloodyskullz on February 17, 2024, 01:09:29 pm

Title: zerotier and opnsense
Post by: bloodyskullz on February 17, 2024, 01:09:29 pm

Hi all,

Having an issue getting zerotier to work properly and I followed the documentation opnsense has. After I configured everything and I reboot the firewall, it seems to interfere with my WAN even tho it has its own gw with a very low priority. I don't get Internet at all unless I disable the zerotier interface.

Need some assistance in getting this working properly because I would like to remote in where ever I go to my home network.

Any suggestions I could check first?

Thanks

Title: Re: zerotier and opnsense
Post by: bmt on February 18, 2024, 09:24:59 am

Perhaps check your system routes and see what the default route is? Clear the routes and firewall states, reboot and try again?

Make sure you don't have overlapping IP's between ZT network and LAN.

Check your firewall rules config and make sure ZT isn't set as the gateway on your WAN rules,