Hi all,
Having an issue getting zerotier to work properly and I followed the documentation opnsense has. After I configured everything and I reboot the firewall, it seems to interfere with my WAN even tho it has its own gw with a very low priority. I don't get Internet at all unless I disable the zerotier interface.
Need some assistance in getting this working properly because I would like to remote in where ever I go to my home network.
Any suggestions I could check first?
Thanks
For what it's worth, I can not get zerotier working on Opnsense. Not with Opnsense documentation anyway. I believe it is a firewall issue which is not addressed
Quote from: bloodyskullz on February 17, 2024, 12:59:51 PM
Hi all,
Having an issue getting zerotier to work properly and I followed the documentation opnsense has. After I configured everything and I reboot the firewall, it seems to interfere with my WAN even tho it has its own gw with a very low priority. I don't get Internet at all unless I disable the zerotier interface.
Need some assistance in getting this working properly because I would like to remote in where ever I go to my home network.
Any suggestions I could check first?
Thanks
Remove the ZT GW, it is not required.
Retrace your steps, the documentation is pretty clear and easy to follow.
https://docs.opnsense.org/manual/how-tos/zerotier.html (https://docs.opnsense.org/manual/how-tos/zerotier.html)
Quote from: jmcgee on July 12, 2024, 11:34:55 PM
For what it's worth, I can not get zerotier working on Opnsense. Not with Opnsense documentation anyway. I believe it is a firewall issue which is not addressed
No FW rules are needed for ZT to be operational.
However, to be able to access the FW using its ZT IP rules _are_ needed:
Firewall - Rules - ZT Interface
- Allow ZT IP/ZT Network to This Firewall DPort 22
- Allow ZT IP/ZT Network to This Firewall DPort 443
I still cannot get my Android to connect to my opnsense router. Appears to not be using VPN at all.
I noticed on Opnsense I have two Zerotier packages. Could this be an issue? Is so how would I delete one of them?
Quote from: newsense on July 13, 2024, 12:10:24 AM
Quote from: jmcgee on July 12, 2024, 11:34:55 PM
For what it's worth, I can not get zerotier working on Opnsense. Not with Opnsense documentation anyway. I believe it is a firewall issue which is not addressed
No FW rules are needed for ZT to be operational.
However, to be able to access the FW using its ZT IP rules _are_ needed:
Firewall - Rules - ZT Interface
- Allow ZT IP/ZT Network to This Firewall DPort 22
- Allow ZT IP/ZT Network to This Firewall DPort 443
Sorry, I am a little dense. Is this rule correct. I am confused by ZT UP/ZT Network if that means the Zerotier interface.
Quote from: jmcgee on July 23, 2024, 04:01:34 PM
I still cannot get my Android to connect to my opnsense router. Appears to not be using VPN at all.
I noticed on Opnsense I have two Zerotier packages. Could this be an issue? Is so how would I delete one of them?
Nothing to delete, both are required
Quote from: jmcgee
Sorry, I am a little dense. Is this rule correct. I am confused by ZT UP/ZT Network if that means the Zerotier interface.
Make it Source ZT Network Destination This Firewall.
Still not connecting from Android.