Hello, I have a problem with the installation of OPNSense 24.1. I am unable to activate the Ethernet port BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller. He doesn't recognize them, does anyone have a solution?
I try with this topic but don't understand .
https://forum.opnsense.org/index.php?topic=25039.0
Please help me.
System - Settings - Tunables
Add a new tunable:
Tunable: if_bnxt_load
Value:YES
Then reboot the machine.
I'd take this to the freebsd-net mailinglist in this case. Include the output of ˋpciconf -lvˋ in your mail.
Can help me to output this pciconf-lv ? Thanks
I have made this but don't work.
System - Settings - Tunables
Add a new tunable:
Tunable: if_bnxt_load
Value:YES
Then reboot the machine.
Quote from: Galicia86 on February 04, 2024, 11:52:29 AM
I'd take this to the freebsd-net mailinglist in this case. Include the output of ˋpciconf -lvˋ in your mail.
Can help me to output this pciconf -lv ? Thanks
You need to login to your OPNsense via SSH to get a shell session with the root user. Then type the command
pciconf -lvand hit the ENTER key. Then copy and paste the output into the email you write to freebsd-net@freebsd.org - better subscribe to that mailing list, first, so you get all possible answers. Also of course explain your problem.
Information about how to subscribe can be found here:
https://lists.freebsd.org/subscription/freebsd-net
HTH,
Patrick
Mail send
I hope you copied and pasted the text output of that command? The mailing list does not forward attachments.
Login via SSH, copy and paste text.
It's ok now ?
cibS@pcio: 0:28:0:
vendor
＝
•Intel
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a38
class
Corporation'
subvendor=0×1043
＝
bridge
subdevice=0x8882
subclass
= PCI-PCI
cib6@pci0: 0:28:2:
vendor
=
'Intel Corporation'
class
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3a subvendor=0x1043
subdevice=0x8882
= bridge
subclass
= PCI-PCI
cib7Opci0:0:29:0:
vendor
' Intel
class
Corporation'
class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a36 subvendor=Dx1043
subdevice=0x8882
= bridge
subclass
= PCI-PCI
sabQ@pci0:0:31:0：
vendor
class=0x060100 rev=0x11 hdr=0×00 vendor=0x8086 device=0x7a06 subvendor=0x1043
Corporation'
class
= bridge
subclass
＝
jac0@pciO: 0:31:3:
vendor
＝
'Intel Corporation'
class=0x040300 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a50 subvendor=0x1043 subdevice=0x87fb
class
multimedia
subclass
HDA
эпе4@рсі0:0:31:4:
vendor
' Intel
class
= serial
subclass
class=0x0c0500
rev=0x11
Corporation'
hdr=0x00 vendor=0x8086 device=0x7a23 subvendor=0x1043
bus
subdevice=0x8882
= SMBus
neS@pciO:0:31:5:
vendor
class=0x0c8000
rev=0x11 hdr=0x00 vendor=0x8086
=
• Intel
Corporation'
device=0x7a24 subvendor=0x1043 subdevice=0×8882
class
= serial
one6@pci0:1:0:0：
bus
class=0×020000
rev=0x01
hdr=0x00 vendor=0x14e4 device=0x16d8 subvendor=0x14e4 subdevice=0x1593
vendor
=
' Broadcom
Inc.
and subsidiaries'
device
= ' BCM57416 Netxtreme-E
Dual-Media 10G RDMA Ethernet Controller'
class
＝
network
subclass
=
ethernet
one7@pciD:1:0:1：
c1ass=D×D20000
rev=0x01
hdr=0x00 vendor=0x14e4 device=0x16d8 subvendor=0x14e4 subdevice=0x1593
vendor
• Broadcom
Inc.
and subsidiaries'
device
= ' BCM57416 NetXtreme-E
Dual-Media 10G
RDMA Ethernet Controller'
class
= network
subclass
=
ethernet
mmeD@pci0:2:0:0：
class=0x010802 rev=0x01 hdr=0x00 vendor=0x2646 device=0x501c subvendor=0x2646 subdevice=0x501c
vendor
'Kingston Technology Company, Inc.'
class
subclass
mass storage
NVM
one8@pciD:5:0:0：
vendor device class
subclass
=
n+ลกDleoneo.~
class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x1043 subdevice=0x87d7
'Realtek
Semi conductor Co. :
' RTL8125 2. 5GbE Controller
I have not yet seen an email to freebsd-net@freebsd.org with that topic?
yes, I receive a lot of emails but I can't tell if it addresses my problem
In my last reply to you I asked for more - necessary - information. Twice already.
Problem solved thanks a lot
Problem solved
How so?
I managed to connect with the GUI and create the Tunable.
if_bnxt_load=YES
In one of your very first postings about the problem you claimed you already did that and the card was still not recognised afterwards. That's why I took you to the mailing list and all this ... ::)
Seriously?
It's because I managed to connect to the GUI thanks to a friend who lent me a USB to Ethernet adapter. Because I couldn't do otherwise.
I am a novice excuse
Good morning,
I just changed my internet provider and I have a 2.4Gb/s port
I have a category 8 ethernet cable but I always get 1Gbs instead of 2.4GB/s in WAN interface
Do you know what the problem could be?
The tunnable has been added.
Can you help me