Print Page - Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller

Title: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Post by: Galicia86 on January 31, 2024, 04:08:05 PM

I have a problem with the installation of OPNSense. Indeed, when setting up network interfaces, the system does not recognize my BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller Ethernet ports.

Can you help me with this problem?

Title: Re: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Post by: Patrick M. Hausen on January 31, 2024, 04:32:20 PM

Is the box reachable via some other interface and the UI working?

If yes, navigate to System > Settings > Tunables and add a tunable:

Name: if_bnxt_load
Value: YES

and reboot.

Title: Re: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Post by: Galicia86 on February 03, 2024, 03:32:10 AM

I did this but the interfaces are still not recognized.

Title: Re: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Post by: Patrick M. Hausen on February 03, 2024, 06:57:47 AM

I'd take this to the freebsd-net mailinglist in this case. Include the output of ˋpciconf -lvˋ in your mail.

Title: Re: Problem with BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller
Post by: newsense on February 03, 2024, 07:03:25 AM

And stick to a thread please

https://forum.opnsense.org/index.php?topic=38564.0 (https://forum.opnsense.org/index.php?topic=38564.0)

OPNsense Forum

English Forums => Hardware and Performance => Topic started by: Galicia86 on January 31, 2024, 04:08:05 PM