OPNsense Forum

English Forums => Web Proxy Filtering and Caching => Topic started by: WhiteTiger on January 15, 2024, 01:48:59 AM

Title: PC updates do not work with Failover.
Post by: WhiteTiger on January 15, 2024, 01:48:59 AM
I have activated the transparent Web Proxy for the HTTP protocol only.
Following the documentation I created these rules.

I also activated failover and therefore changed the gateway for "Default allow LAN to any rule".

Now, updates for Linux, Windows and some Windows applications no longer work.
Just insert an "All Opens" rule (circled in red) addressed to the default gateway and obviously everything works.

I also checked the other options for failover, but I can't find anything wrong.
I also set to Off the  option "Shared forwarding (Use shared forwarding between packet filter, traffic shaper and captive portal)".
Title: Re: PC updates do not work with Failover.
Post by: WhiteTiger on January 15, 2024, 11:42:55 AM
I believe that the problem is limited to the use of DNS, but I'm not sure because I can't find any reports in Unbound DNS: Log File.
However, by enabling the Gateway Group in the LAN rule I then have these problems:

Instead, if in the LAN rule I enable the default gateway

I initially thought the problem was the web proxy, but I became convinced otherwise.