Good morning :)
I've been using Opnsense for the last month or two and in the main it's fantastic, especially coming from the closed world of router firmware :)
My problem began last night when the internet went down, all seemed well from our end but to make sure, we reset the box Opnsense was running on, all was well and it beeped to confirm it had reloaded. The internet was still down for a further 20 mins then came back up on it's own.
However, since then, I cannot access the webGUI on the standard 192.168.1.1. I get a message that This site can't be reached, took too long to respond.
Any clues as to what I can do next? Still very much green in regards to setting all this up properly. It was working perfectly for 42 plus days before the reset.
If you require any other information please ask :)
Are you using HTTP or HTTPs?
If you can ssh into the device try to reset WebGUI access >
https://docs.opnsense.org/troubleshooting/webgui.html
Regards,
S.
HTTP I believe. In the top corner it always says "not secure"
Quote from: Seimus on January 10, 2024, 09:55:18 AM
Are you using HTTP or HTTPs?
If you can ssh into the device try to reset WebGUI access >
https://docs.opnsense.org/troubleshooting/webgui.html
Regards,
S.
Thank you for your suggestion, I've just had time to look into it now and it's worked perfectly :)
Glad to hear ;)
If you can please change/tag your Topic name with [SOLVED]. Lets keep the forum clean.
Regards,
S.