Text only | Text with Images

OPNsense Forum

Archive => 23.7 Legacy Series => Topic started by: Meg on December 17, 2023, 06:37:31 AM

Title: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: Meg on December 17, 2023, 06:37:31 AM
I am pretty sure firmware upgrade 23.7.10_1 slowed my internet speed significantly. Has anyone else had any issues since last update.
Title: Re: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: Meg on December 17, 2023, 07:18:04 AM
After more troubleshooting I ran the speed test plugin and my wan speed was good. Running the speedtest from a browser on the lan the speed is reduced by 2/3.
Title: Re: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: macklij on December 18, 2023, 12:04:13 AM
Is that a wired link or W-Fi? Is this IPv4 or v6?

I have just upgraded to 23.7.10_1 and will test speed tomorrow on my wired PC to see if my very basic setup with 1 WAN, 1 LAN (albeit on a software bridge) is affected. I report back so you have something to compare against.
Title: Re: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: Meg on December 18, 2023, 01:50:08 AM
My bad. No problem with the Opnsense. Further troubleshooting found my switch to be the culprit. Just coincidence I had a bad switch shortly after the update.
Title: Re: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: macklij on December 18, 2023, 11:24:26 AM
Glad you're sorted!
Title: Re: Only getting 1/3 internet speed after upate to firmware 23.7.10_1
Post by: Meg on December 05, 2024, 07:24:50 AM
This post closed
Text only | Text with Images