Print Page - [netasq u500s] no visible interface

Title: [netasq u500s] no visible interface
Post by: cleloup on November 16, 2023, 03:33:30 PM

hello,

sorry for my bad english.

I got a netasq u500s.
I installed opnsense on it.

I have 4 interfaces declared (igb0-igb4)
the chipset is 82580 ( serdes )
but the routeur have twelve port rj45.

what wrong?

thank you

Title: Re: [netasq u500s] no visible interface
Post by: Maurice on November 16, 2023, 09:50:55 PM

Might have an integrated switch? igb0-igb4 are 5 interfaces btw. ;)

Cheers
Maurice

Title: Re: [netasq u500s] no visible interface
Post by: cleloup on November 17, 2023, 01:08:45 PM

hello

It is ok.
I have the interface.

i have some help in url

https://www.reddit.com/r/PFSENSE/comments/o1w4ra/installer_pfsense_sur_un_boitier_netasq_u250s/

thank you

Title: Re: [netasq u500s] no visible interface
Post by: Maurice on November 17, 2023, 01:51:58 PM

Integrated switch with its own serial console... That's interesting for sure!

OPNsense Forum

English Forums => Hardware and Performance => Topic started by: cleloup on November 16, 2023, 03:33:30 PM